green strength
英 [ɡriːn streŋθ]
美 [ɡriːn streŋθ]
湿（生坯）强度
双语例句
- The preparation of synthetic rubber characterized by high green strength was introduced.
本文介绍一种具有高生胶强度的合成橡胶的制备方法。 - "People", li yongxing together, for their contribution to the green home biggest strength!
“环信人”积跬步、致千里，为共建绿色家园贡献自己的最大力量！ - Irregularly shaped powder particles must be used to provide adequate green strength in the as-pressed component.
必须采用不规则形状粉末微粒为压制零件提供足够的未加工强度。 - Effect of morphology and particle size distribution of tungsten powder on compacting performance and green compact strength
钨粉形貌与粒度分布对成形性和压坯强度的影响 - Thermal Analytical Characterization of Green Strength of Reactive Hot Melt Adhesive
热分析法评价反应性热熔胶的初粘强度 - The rapid tester was described for measuring three properties of green molding sand such as compactibility, green compression strength and permeability within 90s, it is suitable fo rapid determination of green molding sand in production line.
湿型砂三性能快速测定仪，可在1分30秒内完成紧实率，湿压强度和透气率的测定，适用于湿型砂的在线快速检测。 - The porous ceramic shell mould made of foaming coating can reduce remained strength and improve collapsibility under the case of ensuring the sufficient green mould strength, high temperature strength and casting quality. This is a new technology in our country.
由发泡涂料制成多孔性型壳在保证其湿强度、高温强度及铸件质量的前提下，可降低残留强度，改善型壳的溃散性，是国内一项新工艺。 - Ceramic tile green ware strength analysis and strength affecting factors as well as pressing characteristics
陶瓷墙地砖坯体强度分析和强度影响因素及坯体压制特征探讨 - Compacts with homogeneous density and high green strength can be obtained by cold isostatic pressing.
采用冷等静压工艺，不但解决了成形的图难性，而且压坯密度均匀、强度高。 - Through mechanism study of semi-stiff pressed calcium-silicate bricks, This article investigates the relation between green density and green strength as well as that between fired brick strength and time of pressing.
通过对采用半干法压制硅酸盐砖的机理研究，探讨砖坯密实度和砖坯强度、成品砖的强度和压制时间之间的关系； - Besides, vacuum deairing of the slurry can obviously improve the green strength.
此外，悬浮液抽真空除气对提高坯体的强度影响明显。 - The article briefly describes the test method and principle for molding sand low green compressive strength test by using of the low pressure cramp device.
简述了使用低压夹具测试型砂低湿压强度的试验方法和原理。 - Therefore, the influence of fly ash on high added fly ash batch forming property, green body strength, forming quality and porous brick sintered strength is analyzed.
为此，分析了粉煤灰对高掺量粉煤灰混合料成型性能、坯体强度、成型质量、多孔砖烧结强度的影响； - Results show that warm compaction can improve the green density and strength of 316L powder greatly and improve its sintered density and tensile strength as well.
试验结果表明：温压工艺能够较大幅度地提高316L不锈钢粉末的生坯密度和生坯强度，也能提高其烧结后的密度和抗拉强度。 - The green ball strength can be improved by adding slaked lime, bentonite and anthracite fines.
添加消石灰，膨润土及无烟煤粉均能提高尘泥渣生球的强度。 - This paper presents the results from the second experiment which have shown that after adding organic binder, the green pellet strength exceeds 29. 4N/ P and that of the dried pellets exceeds 88. ZN/ p both for conventional pellets and composite pellets.
试验结果表明，添加有机粘结剂后，普通球团和复合球团湿球抗压强度都在29.4N／个以上，干球在88.2N／个以上。 - A series of polymer reinforced sol silicates with common features including greatly shortened drying time among molding shell layers, high green strength and temperature strength, low residual strength as well as easy shell-releasing were developed.
聚合物增强快干硅溶胶在国外已有系列产品，其共同的特点是，型壳层间干燥时间大大缩短，型壳的湿强度和高温强度高，残留强度低，容易脱壳。 - The D COAT sol silicate has the features of low residual strength and high green strength in shell mold and high temperature strength as well as good permeability, successfully applied for the production of large blade of turbine engine.
DCOAT快干硅溶胶型壳湿强度和高温强度高，残留强度低，透气性好，已成功应用于汽轮机大型叶片的批量生产。 - Warm compaction process yields higher density and improved green strength over conventionally processed iron powder compacts.
温压工艺可达到比传统铁粉压块更高的密度与生坯强度。 - The approach for the PM frame manufacturing was taken by using the recently developed high green strength lubricants.
因此，采取了用新近开发的高生坯强度润滑剂，制造烧结铁框的方法。 - Some Analyses and Testing Research on the Green Strength Theory of the Bentonite-bonded Sand
关于膨润土型砂湿强度理论的若干分析与试验探讨 - The conclusions are as follows: ( 1) High-pressure water-atomization can be used to produce a pre-alloyed steel powder with high apparent density, high green strength, size-stability after sintering and low hydrogen-loss content;
采用高压水雾化技术可用于生产高密度、高强度、尺寸稳定性的低氢损含量的水雾化预合金钢粉。 - The Research on Green International Competition Strength of China's Textile Fabrics
我国纺织品绿色国际竞争力 - Developing a Soft Magnetic PM Component Used in Wireless Communication Devices with High Green Strength Lubricants
利用高生坯强度润滑剂开发无线通讯装置用PM软磁零件 - Primary Investigation on the Test Method of Green Compressive Strength for Prepared Sand
混成砂低湿压强度测试方法初探 - The materials have high green strength, good toughness, and easy processability.
结果表明，研制的PU材料具有初始强度高、韧性好及工艺操作简单等特性。 - The results show that warm compaction effectively increases the green density and green strength of W-Cu compacts.
实验结果表明：与冷压成形相比，温压能够明显提高W-Cu粉末压坯的密度和强度。 - And the presence of MHA binder onto surface of iron ore particles is able to modify the interfacial characteristics of iron ores and improve the green pellet strength.
而且，MHA粘结剂能够改善铁精矿的界面特性和成球性能。